Print this page

PC 113

  • Certificate Details

  • Certificate Number: PC 113
  • Document ID: UNIM150222
  • Expiration: Thursday, 14 February 2030

  • Main Certification Holder Details

  • Company Name: Unimix Block Industry LLC
  • Company Address: P.O. Box 54131, Dubai, United Arab Emirates
  • Participating Site(s): UNIMIX BLOCK INDUSTRY LLC 
    P.O. Box 54131, Road No. 60, Plot No. 599-641, Jebel Ali Industrial Area 2, Dubai, United Arab Emirates
  • Nominated Agent(s): NONE

  • Certification Details

  • Scheme: Q-Plus Product Conformity Scheme for Fire Building Enclosure 
  • Certificate Status: Active
  • Certification Type: Multisite Certification
  • Certificate maintenance: Validity of the Certificate is subject to Yearly / 6 month Surveillance Audit
  • Surveillance Audit Status: No Pending

Scope of Certification

Test Report Ref. Product Description Tested Results/ Properties Test Standard
Integrity Insulation
ML_520606 SN 1/1 (161123384) UNIMIX_4" Solid Concrete Blocks – Non-Loadbearing Wall 240 minutes 89 minutes BS 476: Part 22:1987 Amd. 2014
ML_CR-1803/4644 SN 1/1 (180321587) UNIMIX_4" Hollow Concrete Blocks – Non-Loadbearing Wall 240 minutes 240 minutes BS 476: Part 22:1987 Amd. 2014
ML_523427 SN 1/1 (161214397) UNIMIX_6" Solid Concrete Blocks – Non-Loadbearing Wall 240 minutes 190 minutes BS 476: Part 22:1987 Amd. 2014
TBWIC_MA44-02, Rev.01 UNIMIX_6" Hollow Concrete Blocks - Non-Loadbearing Wall 240 minutes 112 minutes BS 476: Part 22: 1987
TBWIC_NL 74-1, Rev.01 UNIMIX_8" Solid Concrete Blocks – Non-Loadbearing Wall 240 minutes 240 minutes BS 476: Part 22: 1987
TBWIC_MA44-01, Rev.01 UNIMIX_8" Hollow Concrete Blocks – Non-Loadbearing Wall 240 minutes 169 minutes BS 476: Part 22: 1987
ML_FRQ-1812/1566 SN 1/1 (181206593) UNIMIX_8” Thermal Concrete Hollow Blocks – Non-Loadbearing Wall 240 minutes 240 minutes BS 476: Part 22:1987 Amd. 2014
TBWIC_NL 74-2, Rev.01 UNIMIX_10" Thermal Concrete Hollow Blocks - Non-Loadbearing Wall 240 minutes 240 minutes BS 476: Part 22: 1987
·         No alterations shall be made to any product specifications or parameters mentioned in the test report such as design, components, performance criteria without prior
approval from CCS. Any violation of this requirement will invalidate existing test reports and certification approvals.
·         Test reports shall not be combined with primary FoA reports. It is crucial to follow the test reports precisely to ensure accurate results and reliable product performance.